SE Racing Big Ripper 29″ Bike-Shiny Red BIG BIKES

The 29” Big Ripper has been a staple in the SE line for over 10 years now. It’s built around a monster-sized PK Ripper style frame and features a stunning shiny red & chrome colorway. The spec is top notch with Cr-Mo Landing Gear forks, double-wall rims, Vee Speedster tires, and a new Lightning Bolt snap padset. One glance, and it’s easy to see that the Big Ripper is the baddest 29” BMX bike out on the streets.

RECOMMENDED RIDER HEIGHT: 5′ 5″ and up

FEATURES:

• Retro 6061 aluminum Big Ripper frame with floval tubing and looptail rear end
• Full Cr-Mo Landing Gear forks
• Cr-Mo Big Honkin’ cruiser bars
• Double-wall rims with sealed bearing high-flange hubs
• SE 3-pc V-Ridge cranks with alloy SE sprocket
• Authentic ODI Mushroom II grips with donuts
• Vee Tire x SE Racing Speedster 29” x 2.10” tires
• SE Flyer seat with bottle opener
• SE Racing Lightning Bolt Snap padset
• SE Racing Rad Plate and SE Wheelie pegs
• 29.6 lbs

SPECS:

• FRAME 6061 Aluminum Floval Tubing, Looptail Rear End, 68mm Euro Bottom Bracket, Retro Dropouts
• FORK Landing Gear, Full Cr-Mo
• CRANKSET SE V-Ridge 3-pc Cr-Mo, Cranks, 175mm, Sealed Euro Bottom Bracket, 160mm Spindle Length, 19mm Spindle Diameter, 33T Alloy SE Racing Sprocket
• PEDALS X-Pedo Low-profile Platform w/ Removable Pins
• CHAIN KMC S1
• WHEELSET Sealed Bearing 36H High-Flange Alloy Flip Flop Hubs w/ Double-wall Rims, 15T Freewheel, Stainless Spokes
• TIRES Vee Tire Co x SE Racing Speedster, 29″ x 2.10″ Front & Rear
• BRAKESET Tektro 837-AL V-Brake, Slick Cable
• BRAKE LEVERS FSA NO.42/ACB Sealed 1-1/8″-1.5″ Tapered, Integrated Headset
• HEADSET Tange 1-1/8″ Threadless
• HANDLEBAR Big Honkin’ Cr-Mo Cruiser Bar, 29″ x 6″, 10° Backsweep, 1° Upsweep
• STEM Retro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts, 55mm Reach
• GRIPS Special Edition ODI Mushroom II Dual-Ply Grips, Made in USA, w/ SE Donuts,
• SEAT SE Flyer Seat w/ Custom SE Bottle Opener Brace
• SEATPOST Micro-Adjust Alloy, 27.2mm
• SEAT CLAMP SE Racing Champ Clamp, Alloy, 31.8mm Inner Diameter
• ACCESSORIES SE Racing Rad Number Plate, Lightning Bolt Snap Padset, Alloy Valve Caps, SE Wheelie Pegs
• WEIGHT 29.6 lbs / 13.42 kgs

GEOMETRY:

• TOP TUBE, ACTUAL 23.6″ 
• SEAT TUBE, CENTER TO TOP 16.9″ 
• SEAT TUBE ANGLE 71° 
• HEAD TUBE ANGLE 71° 
• CHAINSTAY LENGTH 18″ 
• WHEELBASE 43.7″ 
• BOTTOM BRACKET HEIGHT 12″ 
• STANDOVER 30.5″ 
• SUGGESTED RIDER SIZE 5’5″+ (165cm+) 
• STEM 55mm 
• HANDLEBAR WIDTH 29″ 
• CRANK 175mm 
• WHEEL SIZE 29″ 
• SEAT POST DIAMETER 27.2mm